How to Connect / Bridge Two Router Wirelessly Using WDS Wireless Distribution System Settings

How to Connect / Bridge Two Router Wirelessly Using WDS Wireless Distribution System Settings

if you don't have WiFi repeater/extender to increase your WiFi network range then don't worry you can still increase WiFi range using your another WiFi router by connecting two WiFi router wireless using WDS - Wireless Distribution System / Bridge. 

here,i have two WiFi Router (note only WiFi router not repeater or extender )

1.TP-Link W8970 (Black Color)

2.TP-Link W8968 (White Color) you can buy it from here TP-Link TD-W8968 Wireless N USB ADSL2+ Modem Router

http://fkrt.it/iOCnyKNNNN

i want to bridge W8968 (white) to my main WAN connected WiFi Router W8970 (Black) using Wireless Distribution System (WDS)

You Can Buy WiFi Router For Home under 1000 INR :-

TP-LINK TL-WR841N 300Mbps Wireless N Router http://fkrt.it/impTxKNNNN

Mi 3C/R3L Router

http://fkrt.it/ZaTaOnuuuN

steps :- 

1.go to wireless then wireless security and change the default WiFi password

2.after that go to basic settings and give WiFi network name

3.enable WDS and click scan and select the WiFi network ssid name to which you want to bridge this router and click connect

4.both router should be on the same WiFi channel

5.after that select key type to wpa2-psk and enter your 

main AP's WiFi password

that's it your router is bridged to your main AP router.